PA Accessories

Audix APS911 Battery Operated Phantom Power Adapter
Features:

The Audix APS911 Battery-Operated Phantom Power Adapter is a your ideal phantom power supply solution for energy-efficient electret mics; it can also adapt 48V phantom power from a mixer or preamp to the mini XLR connection found on these mics. Use it with Audix's lavalier, hanging, boundary plate, and HT2 headset microphones.

Special features include an on/off switch and a bass roll-off feature.

Adapt Standard Phantom Power for Electret Mics

The APS911 mates with phantom power sources on standard XLR connectors — such as 48V mixer channels — and assures that power is supplied to the correct mini XLR pins for Audix electret mics.

On/Off Switch

A built-in on/off switch helps conserve battery life and acts as a mode selector switch when using the APS911 as either a battery-operated phantom power source or passive phantom power converter.

Bass Roll-Off

Clean your recordings of low-end rumble, structural noise transmitted through a mic stand, or unused frequencies by activating the handy 150Hz low cut filter. Since most human speech occurs above this cutoff, you'll want to use it routinely for voice recording.

The APS911 is compatible with Audix Microphone models: ADX10, ADX40, ADX60, HT5, ADX10FL, and HT2

Model: APS911
Manufacturer: Audix
(read more...)
Regular Price: $57.00
Sale Price $57.00
Audix DCLAMP Percussion Mount Mic Clip
Features:

The Audix DCLAMP is a flexible mini-gooseneck mic mount that securely clamps onto most drum tension lugs. Works specifically with Audix D2 and D4. Other mics can be used by replacing clip.

Model: DCLAMP
Manufacturer: Audix
(read more...)
Regular Price: $32.00
Sale Price $27.95
Audix DCLIP Microphone Clip
Features:

Heavy-duty nylon molded snap-on microphone clip provided as standard equipment with Audix D Series, ADX51 & SCX Series. Works well with ADX12, ADX18, TM1, and any other mic with an outer diameter of 19mm; works with DVICE, DCLAMP and DFLEX mounting clips, too.

Model: DCLIP
Manufacturer: Audix
(read more...)
Regular Price: $12.50
Sale Price $9.95
Audix DVICE Mini Gooseneck Rim-Mounted Drum Clamp
Features:

The Audix DVICE is a flexible mini-gooseneck mic mount that securely clamps onto a drum rim. The DVICE comes standard with all Audix D Series mic packs. Works perfectly with Audix D2, D4, F2, F4, and i5.

Model: DVICE
Manufacturer: Audix
(read more...)
Regular Price: $32.00
Sale Price $27.95
Audix WS1218 Foam Windscreen for Micros, MG12/15/18, ADX12/18
Features:

  • External foam microphone windscreen
  • Designed for use with Micros, MG12/15/18, and ADX12/18 microphones
  • Reduces wind, sibilance and pop noise
  • Protects microphone from external defilement


  • The Audix WS1218 Foam Windscreen is designed for Micros, MG12/15/18, and ADX12/18 microphones. It reduces wind, sibilance and pop noise. Available in black.

    Model: WS1218
    Manufacturer: Audix
    (read more...)
    Regular Price: $7.00
    Sale Price $6.95
    Boss PSA-120S Power Adaptor
    The Boss PSA Series Power Adaptor is the recommended power supply for products including all new BOSS Compact and Twin pedals, ME-50/-20/-20B Multi-effects, the DB-66/-88/-90 metronomes, DR-Series drum machines, FC-Series foot controllers, MC-202, SH-101, SP-202, TR-626, and all TU-Series tuners.

    Features:
  • New generation power supply for today’s digital instruments
  • 500 mA of current to easily power multiple pedals – even digital ones
  • Power cable length increased to nearly 10 feet!
  • LED indicator for quick visual verification of on/off status
  • New design which does not cover adjacent power outlets

  • Technical Specifications:
  • Input Voltage : AC 117 V (50Hz/60Hz)
  • Output Voltage : DC 9 V
  • Maximum Current Output : 500 mA

  • (read more...)
    Regular Price: $31.50
    Sale Price $29.00
    Hercules  Tablet Holder - fits 7" - 12.1" tablets (DG305B)
    Features:

    Suitable for 7"-12.1" tablets with the measurement up to 235 mm width and 280mm height

    360 degrees ball-joint design

    3-way adjustable holder is easy to use and folds into a minimal, compact size.

    Fully-covered one-piece clamp fits 15.8-25.4mm (0.62-1") round tubes and 19mm (0.75") square tubes.

    Suction cup is included for desk top use.

    Specs:
  • Weight: 0.49 kg (1.1 Ibs.)
  • Load capacity: 5 kg (11 Ibs.)
  • Folded size: 200 mm x 90 mm (7.87" x 3.53")

    Due to the variety of tablet holder measurement, please consult your local dealer to make sure the suitability before purchasing.

    Model: DG305B
    Manufacturer: Hercules
  • (read more...)
    Regular Price: $69.99
    Sale Price $49.99
    Hercules HA300 Tablet Holder
    The easy-to-use clamping mechanism on the Hercules HA300 makes this a winner!
    The HA300's versatile design fits tablets sized from 8.9"–10.1” — it's a perfect fit for your iPad, iPad2, ipad3, Galaxy, Xoom, Iconia, Eee Pad, and more. It also allows the user to tilt the holder a full 360 degrees into either landscape or portrait modes with its ball-joint design.

    The EZ adaptor allows the HA300 to be attached to the top of microphone stands with either 3/8" or 5/8" thread. A convenient Detachable Triangle Table support comes in handy for desktop use. Works in both landscape and portrait modes.

    Weight: 0.3 kg (0.7 lbs)
    Load Capacity: 5 kg (11 lbs)
    Folded Size: 320 mm x 260 mm x 85 mm (12.6" x 10.2" x 3.3”)
    (read more...)
    Regular Price: $64.95
    Sale Price $39.99
    K&M  19742 Tablet PC Stand Holder (19742.500.55)
    Features:



    Model: 19742.500.55
    Manufacturer: K&M
    (read more...)
    Regular Price: $74.99
    Sale Price $59.99
    K&M 21422 Carrying Case (21422.000.00)
    Made of black waterproof nylon, the 21422 Carrying Case from K&M is designed to carry 2 21420 speaker/monitor stands. Features two inside compartments with draw-string closure and sturdy handles.

    Dimensions: 50.787" x 5.512" x 5.512"
    Fastener: Draw-string closure
    Material: Nylon
    Weight: 0.793 lbs
    (read more...)
    Regular Price: $29.99
    Sale Price $29.99
    K&M  26735 Topline Speaker Stand  - Pure White (26735.000.76)
    The K&M 26735 Pure White Speaker Stand features a heavy cast iron base plate and requires very little floor space. The tried-and-tested spring-loaded bolt with locking screw makes height adjustment easy and safe. The stand has a maximum pull-out height of 70.079" and is suitable for speakers with a max weight of 44.053 lbs. The integrated mounting aid simplifies mounting loud speaker cabinets.

    Pure white look is ideal for weddings and other special occasions.

    Base Diameter: 17.716"
    Height: 43.30"—71.26"
    Adjustment: Spring-loaded bolt and locking screw
    Leg Construction: Round cast-iron base
    Material: Steel
    Max Load: 44.053 lbs
    Tube End(s): Diameter 1.378"
    Color: Pure White
    Weight: 21.696 lbs
    (read more...)
    Regular Price: $189.99
    Sale Price $189.99
    K&M  26751 Carrier Bag For Round Base (26751.000.00)
    Tear-proof, water-resistant nylon bag for round-base speaker stands from K&M. The bag has two strong hand straps to carry the 16.534 lbs cast metal base. Ideal for the pure white finish speaker stands.

    Dimensions: 18.11" x 0.984"
    Fastener: Zipper
    Material: Nylon
    Weight: 0.837 lbs
    (read more...)
    Regular Price: $31.99
    Sale Price $31.99
    (!GOOGLE_ECOM_TRACKING_V2!)